Introducing the startmonkey- the world's smallest "jump start" system for car batteries
The startmonkey200 is suitable for use on batteries with up to a 650CCA (Cold Cranking Amps - you can check your cold cranking amp rating by checking the sticker on the top of your car's battery) and can restart this type of standard 12 volt car battery between 15 and 20 times on a full charge thanks to its High Energy Dynamic Polymer Battery. If your battery exceeds 650 CCA, you will require the startmonkey400.
It's packed with high-tech features to give you total peace of mind. The startmonkey200 has 2 output channels: 1) a 12volt, 200Amp car jump start and 2) a 12volt, 100 watt max, 8Amp DC output for charging your portable gadgets.
So easy to use - For the average car with a flat battery, firstly ensure the engine battery is 12 volts and has a CCA rating of less than 650. Check the battery capacity level in the startmonkey200 and then simply attach the jump leads (red to red, black to black) to your car battery and the startmonkey200 will automatically start delivering 200 amps of continuous power. Leave the startmonkey200 for 5-8 seconds, then turn the ignition on your car and your car will start.
The startmonkey200 has an input socket so you can recharge it. From empty, the startmonkey200 will be recharged via the in-car charger in 8 hours. The startmonkey200 can also be recharged via the solargorilla and the AC mains charge from the powergorilla The input socket can even take voltages between 15 - 24 volts to recharge the startmonkey 200. The startmonkey200 has very low static wastage - meaning you can leave it unused for up to a year and it will still hold up to 75% of its power and can also be recharged 500 times.
The DC output socket on the startmonkey200 means you can also charge your portable gadgets! You can even use the in-car charger socket with your 12volt in-car chargers to operate your laptop, GPS system, etc
|On Offer / Wanted||On Offer|
Safety Tips: Your safety is important to us.